Showing posts with label Sanitization. Show all posts
Showing posts with label Sanitization. Show all posts

Monday, March 29, 2010

Wines are on Oak

This was a high production week for making booze (3 batches of beer and work on two different batches of wine), which didn't leave me much time for blogging, as a result I'm condensing down my labor on the wine into a double post.

Last Wednesday, after way too long in the office, I made it out to San Francisco and met up with Spencer, Luke and Walsh. Since they were finishing up their meals at the Blue Jay Cafe (my old Western Addition standby) as I made it there, I ordered the creole and powered it down so we'd have time to rack the Cabernet. Luke's new garage is well appointed to do the transfer of wine with a sink, good lights, plenty of space and easy access to the gutter. We measured and added the suflites to the empty carboy to sanitize it. Then we siphoned the wine out of the carboy it had occupied since December and into its new home another carboy.

The twist during this racking is that we've added oak balls to the wine. As I mentioned in an earlier post, these are the poor man's way to approximate the flavor of an oak barrel. The tricky part for us first time winemakers is knowing the right time to get the wine off the oak so the wine doesn't soak up too many of the woods tannins and overpower the wine's flavor. It's all based on judgment and frequent tastings. You want to pull the wine off the oak with another racking when the wine's been imparted with just a tiny hint of the flavor of the oak. It's difficult to get right your first time, since the flavors of the wine are still very young and will continue to develop as the wine ages. This will continue even after the wine has been bottled.

The wine racking was easy, there was little in the way of lees or other sediments left after our previous racking. We may have been a little too conservative and left too much of the lees behind with our initial racking, but with as infrequently as we have time to mind the wine, this only results in a small drop in volume and maintains the quality of the finished wine.

To assist us in getting the oaking right we tasted the just racked wine. It is a little less fruity than the last time we racked and the flavors are starting to develop, but the wine is still very young. The oak should add a little depth to the flavor and further develop the wine's taste.

Here is the oak on the wine. It's tough to see the brown of the oak in the inky red of the wine and the garage lighting, but they're there in the carboy. The oak is a medium toast french oak that was passed to us by a winemaker friend. I'm thinking they may be a higher quality than the oak cubes we're using for the Syrah. We'll see during the various rounds of tastings in the coming weeks.

That's the 2009 Cabernet Sauvignon on what's approximately Day 167.

Up next on Saturday, I added oak to the Syrah, which had been racked a few weeks ago.

As I mentioned earlier, we are using oak cubes for the Syrah. They're a bit smaller than the oak balls we're using on the Cabernet Sauvignon and a heavier toast (on two of the three types of oak) which will impart a different flavor profile than the medium toasted oak. As with the Cab, tasting the wine is going to be important to ensure we don't over oak the wine. The tasting during this racking revealed a flavor very similar to what we encountered during our previous racking. A very mellow and light flavor, though it did vary a little from carboy to carboy, the natural variation of when in the press each was filled and variation of the different fermentation tanks the carboys were filled from. We've managed to track this through labeling each carboy and tracking the contents during racking. Hopefully all this effort will allow us to learn from our experiences and improve future batches of wine.

Again, the oak in the wine is not particularly visible in the neck of the carboy. The oak cubes carried a few air bubbles into the wine, unlike the oak balls. I'll be curious to see if this takes the wine's flavor in a slightly more oxidized direction.

From Winemaking 1.0
I also need to thank my lovely assistant, Sara. I did bribe her into helping me with the offer of wine tastings, but her help made schlepping the carboys and getting the oaking right easier. So thanks good looking.

So that's the Syrah on Day 156.

Sunday, December 27, 2009

2009 Syrah - Day 63 - Racking

Having a little extra labor around as a result of the holidays, it seemed like an excellent chance to rack the Syrah. I was hoping to take advantage of the cold late-December temperatures to drop the tartaric acid crystals from solution in the wine. Unfortunately rushing out of my parent's house on Christmas Day, I forgot to grab my siphon and carboy and as a result was a few key pieces of equipment short of what we needed for an efficient and effective racking. So as soon as the brew store in Sacramento opened the day after Christmas I was there with Spencer and Matt to get what we needed. This delay let it warm up into the the 50s, so the temperature was probably too warm to pull the tartaric crystals out. Guess we'll need to be a little more on point next time we rack the wine.

With a new carboy and small diameter siphon in hand we set to racking the wine. As this was our first endeavor that we didn't have an easy siphon, we struggled to find a sanitary way to get siphon started without the ease of a one-way valve.

Basically it was amateur hour of us trying different ways to get enough liquid in the tube to get the siphon started. We tried everything from using a straw to get it started to crinking the hose and pumping. All to no avail. The siphon refused to get started well enough for gravity to take over. Finally we went back to the book we'd been referencing and reread the racking section.

We basically settled on you can't start the siphon without some amount of cross contamination (if you're lacking a one-way valve). The book recommended using your mouth to start the siphon and then treating the transferred wine with a dose of sulfites to kill any contaminants. I wasn't particularly happy with this solution, but nothing better was presenting itself so we went for it.

After we got the siphon going it was just a matter of waiting for the smaller diameter tube to drain each of the carboys. It took awhile for the 38 gallons to pass through the small diameter tube of the siphon. That worked out OK, since we only had one extra carboy and it gave us enough a gap between steps to clean the lees out of the most recently emptied carboy, sanitize it and then measure and dilute the sulfites before we needed to start filling the new carboy without losing our siphon.

Another thing we made a conscious effort to do was to aerate the wine. Racking it the one time it is a good thing to have the wine exposed to air. A little bit of oxygen helps to kick into gear that last remaining yeast so they can burn through the remnants of sugar that might have made it through the secondary fermentation. It also gives the malolactic bacteria a little bit of a nudge, since the wine is oxygen poor after all the biological activity that's been taking place in it. After this racking, one of the main goals of the vintner is to protect the wine from exposure to air and light. These can damage the wine. One way to minimize exposure to air it to make sure the wine is filled all the way to the neck of the carboys. This gives the surface of the wine a minimal exposure to the air and thus minimizes the oxidation of the wine.

We also tried to minimize our wine lost during each racking by tipping the carboys on their side as the siphon was drawing near the bottom. This does stir up a little bit of the lees, but it also allows the siphon to capture a little more of the wine that would otherwise be left on the lees and dumped out on the lawn. It doesn't disturb the lees too much as it tends to be a heavier sludge than the wine we were trying to siphon.

Most sources say you expect to lose about 10% of your volume during the first racking. This may seem like a lot, but it's the price you pay for clean and clear wine. This batch ended up only losing about 2.5 gallons (out of 38 siphoned), a little less than the amount expected. I'd like to chalk that up to careful siphoning, but we may have also pulled a little bit more yeast than is ideal into the next round of aging the wine. Only time will tell.

The wine tasted good. The malolactic fermentation was further along than the Cabernet. This was a surprise since the Syrah was stored in a much colder environment than the Cab (my garage for the Syrah, Luke's closet for the Cab). The colder temperature is supposed to inhibit the bacteria's progress and growth. Unfortunately the dose of sulfides likely arrested the malolactic fermentation by killing all the bacteria that we inoculated the wine with. That will need to be something we need to pay attention to the next time we rack the wine. The secondary fermentation tasted like it was close to done, if not completely finished. We didn't put a sample through the hydrometer, but I will probably try to do it next weekend so that we can have a few hard numbers to work with, same probably should be true for an acid titration. It's been since primary fermentation that we've looked at those numbers and an update on the progress would give us a look into the progress the wine has made. There was a little carbonation in the wine too, though not as much as in the Cabernet. Other than that the wine tasted good, but it definitely needs a bit more time for the flavors to develop and to clarify further. I'm thinking the next racking should be two or three months down the line, but we will see.

Monday, November 2, 2009

Syrah - Day 9 - Sanitation

One aspect of wine making that has been unremarked upon up until this point is sanitation. Making wine is surprisingly dirty business. The grapes come out of the vineyard covered in everything and anything that came into contact with the grapes on the vines. This includes leaves, stems, tendrils, dust, dirt, spiders, and mold. The crushing process attempts to remove as much of these as possible, but even the best crusher/destemmers leave a fair amount of detritus in the must.

The vintner is then stuck trying to make wine out of must that includes more than just grapes juice, grape skins and seeds. The simple way to do this to kill everything that entered the wine with a dose of sulfites. This (hopefully) eliminates all the rogue yeast, bacteria and fungus that are inevitably present on the grapes. From the addition of the sulfites onwards, a winemaker needs to treat the must carefully, only allowing it to contact tools and additions that have been carefully sanitized. There are innumerable means of sanitizing your tools and implements, heating them above 160 degrees F, using chemical agents or only using items that come from a sanitary packaging or environments.

Heating all your implements above the temperature that kills microorganisms is not usually practical for a vintner. Many of the tools are plastic and would risk melting if heated above 160 F. Further it is not very convenient to have boiling water or a autoclave near your fermenters. Heating is much more practical for home brewing, where the residual heat of the wort is used to sanitize several parts of the process before fermentation is implemented. Since heat would break down many of the flavors wine makers are trying to capture this is doubly trouble some.

Therefore the main method of sanitation for wine making is chemicals that will kill microorganisms. The two primary chemicals I use are citric acid and iodine based sanitizers. Both come in concentrate forms that are available from home brew supply shops. They are both food grade sanitizers that when used in the appropriate concentrations should not leave a taste and effectively kill of potential contaminants. Other chemical sanitizers are available, but should be used with caution in food applications. Bleach is exceptionally effective at killing microorganisms, but it is very persistent and can end up killing the yeast, the microorganism whose growth winemakers are trying to promote. It also has a harsh taste that does not wash out easily. It should only be used for situations when equipment needs a harsh was, such as after a carboy has been allowed to mold after a long period of disuse, even then care should be exercised.

The best way to work with concentrated chemical sanitizers is to mix up a batch that's large enough for your needs and keep it in a container that allows you to reuse it multiple times to save time and chemicals.

The other means of sanitation is keeping sanitary substances from coming into contact with non-sanitary substances. Things like yeast additives and tartaric acid are additives that should not be heated or subjected to chemical sanitizers. If you are purchasing these additives to the wine from a reputable source (what did your mother tell you about buying chemicals off strangers in the streets?), you need to work under the assumption that the chemicals are manufactured and packaged in a sanitary environment. To keep the additives sanitary you need to ensure all the tools and containers the additives come in contact with have been properly sanitized. So when you are measuring the additives, the spoon and the container the additives are weighed in all need to be kept sanitary. It might be a pain, but it's the only way to ensure you're not adding a bacteria or fungus alongside the desirable additives.